Special Order, Not returnable

2006–08 Dodge Ram 1500 2 inch Front / 4 inch Rear Complete Lowering Kit

DJM Suspension
DJM:230624
lbs
    Delivery time:Allow 4 to 12 weeks delivery
Add to cart
  • Description
  • More

DJM Lowering kit

Ships by  Courier
230624 | 2006–08 Dodge Ram 1500 2 inch Front / 4 inch Rear Complete Lowering Kit, For a drop on the mild side, 2 inch in the front with lowering coils and a 4 inch rear lowering kit will satisfy that need! Drop coil springs make the front a snap and the rear lowering kit only requires a little elbow grease to flip the rear and install lifting shackles to net out your 4 inch of drop. What you get is a very noticeable 2/4 drop which gets you much closer to level and a stance that will turn heads! IMPORTANT Shocks are NOT included with this kit and need to be purchased separately. The recommended shocks are below in the Related Products Section. The 2006 - 2008 Dodge Ram 1500 requires the following: Two 1315 front shocks, One 2200 rear driver side shock, One 2400 rear passenger side shock  
Manufactured by DJM Suspension | 230624 |  2006–08 Dodge Ram 1500 2 inch Front / 4 inch Rear Complete Lowering Kit,  For a drop on the mild side, 2 inch in the front with lowering coils and a 4 inch rear lowering kit will satisfy that need! Drop coil springs make the front a snap and the rear lowering kit only requires a little elbow grease to flip the rear and install lifting shackles to net out your 4 inch of drop. What you get is a very noticeable 2/4 drop which gets you much closer to level and a stance that will turn heads! IMPORTANT Shocks are NOT included with this kit and need to be purchased separately. The recommended shocks are below in the Related Products Section. The 2006 - 2008 Dodge Ram 1500 requires the following: Two 1315 front shocks, One 2200 rear driver side shock, One 2400 rear passenger side shock, You can build a radical engine by combining parts made by different manufactures but you really have know what your doing! The same thing is true when it comes to suspension parts. Phone ringing: Hello this is tech how can I help you? Man I got a real problem, I lowered my truck and it’s low and I like that, it looks pretty good and I like that, but I can’t get the front end to align and it rides like crap, I don’t like that! (Tech) how did you lower it? Well I been saving and shopin for awhile and got great deals on a set of spindles, then I went down a little more with some coils and later decided to slam it by adding control arms. Then I put in a flip kit and added lowered leafs and shackles to get the back slammed, how can I fix it so I get a good ride and not destroy my tires? Advanced installers and experienced shops have done enough suspension work to know which parts you can combine without bad side effects to get “the look”. And really their knowledge came from doing it wrong sometime in the past. So if you want to do your own work and your not an expert seriously consider buying a complete suspension kit. The parts in kits are designed to work together in an optimum way, with out nasty surprises, and you should not have to buy any other parts to finish your job and get to driving around! While it is fun to fool around in the garage it’s more fun to drive around!!  Product information updated on 2024-03-24. This product can ship by Courier