2009 to 2018 Dodge Ram 1500 4WD Regular, Quad or Crew Cab Lowering Kit

2009 to 2018 Dodge Ram 1500 4WD Regular, Quad or Crew Cab Lowering Kit
BellTech
KitRam094wd
Add to cart
  • Description
  • More

Lowering Kit Builder Tool. The Easy Way to Build Your Lowering Kit

Our lowering selection tool for the 2009 to 2018 Dodge Ram 1500 4WD Regular, Quad or Crew Cab Lowering Kit. Each kit can be selected with or without either Belltech NitroDrop 2 shocks, or Belltech Street Performance shocks.

Lowering your 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Dodge Ram 1500 4WD may not be approved, but it sure does look cool.

The Lowering Kit is available in the following configurations.

The McGaughys kit uses 2 inch front drop spindles are used, and 4 inch rear drop is achieved with rear coils and alignment kit.

The Belltech kit uses front struts along with rear coils and drop brackets to achieve a 2/4 drop

Lowering the rear by more than 2 inches requires shorter shocks.

 

This kit also fits 2019 to 2021 Ram 1500 Classic Models

Kit Notes:

  • The McGaughys kit works on 4wd but is not approved for them, Drive axle wear may occur
  • The Belltech kit is designed and approved for 4wd trucks 

2009 to 2018 Dodge Ram 1500 4WD Regular, Quad or Crew Cab Lowering Kit

The front suspension on the current series of Ram trucks had little change from the 2006 to 2008 models. The 4WD models stayed with a coil over strut system. In fact a lot of the parts carry over from the previous model years. Lower the 4WD models with spindles "At your own risk" due to drive axle issues once lowered.

The rear suspension on the other hand was converted to a trailing arm and coil system which provided a smoother ride while reducing the suspension weight. The rear suspension in the 4WD models is virtually the same and can be lowered with replacement coils in a variety of different heights. Keep in mind that some of these trucks feature air suspension that will prevent any except the most extreme lowering efforts.