2002 to 2005 Dodge Ram 1500 2WD Regular or Quad Cab Lowering Kit By Belltech

2002 to 2005 Dodge Ram 1500 2WD Regular or Quad Cab Lowering Kit
BellTech
KitRam022wd
Add to cart
  • Description
  • More

Lowering Kit Builder Tool. The Easy Way to Build Your Lowering Kit

Our lowering selection tool for the 2002 to 2005 Dodge Ram 1500 2WD Regular or Quad Cab Lowering Kit By Belltech. Each kit can be selected with or without either Belltech NitroDrop 2 shocks, or Belltech Street Performance shocks.

Your 2002, 2003, 2004 or 2005 Dodge Ram is available to lower using a Belltech lowering kit

The Lowering Kit is available in the following configurations;

The front can be dropped 2 inches using coils and the rear dropped by 3 inches using leafs.

To drop the front 2 inches using coils and the rear 5 inches, a flip kit is required which can result in a "tail low" rake.

Lowering the rear by more than 2 inches requires shorter shocks.

2002 to 2005 Dodge Ram 1500 2WD Regular or Quad Cab Lowering Kit By Belltech

The front suspension on the 2WD Ram 1500's is a typical control arm, coil and spindle combo that you can lower by replacing any of the items. But, there are some notes. They made a control arm change in 2006 so DJM's listing only works up to 2005. The spindles didn't change unless your truck is an SRT, then they had Brembo brakes so the spindles don't work.

In the rear is a typical leaf setup but replacement hangers are not an option and the shackle only has room for a one inch drop. So that means the most common drop is with a flip kit but a lot of times it goes down too far. Your best choice is to go with a set of BellTech replacement leaf springs that will give you 3 inches of drop.