2009 to 2013 Ford F150 4WD Complete Lowering Kit

KitFo094wd
Add to cart
  • Description
  • More

Our Suspension Lowering Kit Selection Tool

Our lowering selection tool for the 2009 to 2013 Ford F150 4WD Complete Lowering Kit By Belltech. Each kit can be selected with or without either Belltech NitroDrop 2 shocks, or Belltech Street Performance shocks.

Drop your 2009, 2010, 2011, 2012 or 2013 Ford F150 4WD as low as 3 inches on the front and 5 and a half inches on the rear.

The Lowering Kit is available in the following configurations.

The rear can be dropped by 2 inches using shackles.

To lower both the front and the rear by 2 inches, struts and shackles are used.

The front lowered by 2 inches with struts, the rear can be lowered by 3 inches with shackles.

For this make and model, to lower the front by 3 inches and the rear by 5 inches, we use a DJM lowering kit that includes control arms for the front and a flip kit for the rear.

2009 to 2013 Ford F150 4WD Complete Lowering Kit By Belltech

The front suspension in these trucks had only very slight changes from the previous body design and they are still using a coil over strut in the front on 4WD models. Lower them with coils, control arms or struts. Just use some caution on the amount of drop on the 4WDs due to the CV axles. In 2014 they changed the lower strut mount meaning that you can no longer get a replacement strut and if you go with control arms you need to use the with a strut adapter.

You can get 2 inches of drop by replacing the shackles, 3 inches drop on the by using shackles and removing the blocks and anything farther requires a flip kit to get 4 to 7 inches of drop. If you use a 2WD flip kit on a 4WD truck you are going to get extra drop so that 5 inch flip might end up being 6.5 inches.